FaithReviews.com - DIY Wind Turbine

How to Build a Homemade Wind Power System

using a DIY Wind Turbine Guide

Traditional Wind Power Systems you can buy and have installed cost around $4000. These systems will take years to recover your initial investment. Fortunately a homemade wind power system can cost as little as $100-200 when you use a DIY guide. The Step by Step guide helps you build your own wind mill easily and affordable.

Luckily, the last six months has seen a crop of Wind Turbine Do-it-yourself guides, which show you how to make a wind mill for your home - using low cost materials, and with little or no technical knowledge required.I decided to sit down and review these new guides.

Overall, I was pleasantly suprised with the results - the technology evidently does work, and if you pick the right guide, you could well be up and running in a few hours.

Earth4Energy.com - Scam or a Real Deal ? Proof

"Still the best Home Made Energy Solutions Kit in 2008...

Earth4Energy.com
5.0 stars rating

Ease of Use	(5/5)
Electricity Savings	(5/5)
Customer Support	(5/5)
Environment Benefits	(5/5)

Visit Website Now

Our First Pick: #1 Earth4Energy.com (Michael Harvey)

"This do-it-yourself guide is the best value for your money!"

The easy to follow step-by-step instructions were written for anyone to understand and included diagrams for further explanation. The guide is available as soon as you order online, so you are ready to start immediately.

This is the only guide that assumes absolutely no Prior knowledge.The materials needed for construction can all be found at your local hardware store. There are even some secrets revealed that will help you get some parts, like batteries, for free. The windmill can be built for around $100, while the solar panels will cost under $200. The actual construction was very quick and took only a couple of hours.

Impressively, Our support ticket was responded to in half an hour (although it could take a little longer at weekends), and there is an unconditional 60 days guarantee.

Given that its proven to reduce the Electricity Bill by as less as 95%, you could well recoup your investment in under 3 weeks.

Proven Results Enough Electricity is produced to power appliances and lights. At a minimum, your electricity bill will be tremendously reduced.

This Month Update : there is now a promotion running on the site, and it is temporarily available for $49.97 instead of $99.97 - as such, we recommend ordering sooner rather than later.

The Verdict: Fast and easy setup; works for complete novices; proven savings of upto 95% on Electricity Bills - Our top pick. Great job Michael!

Bad Thing: What If we build only solar panel and there is no sun, so we need to build both solar panel and Wind Mill system so that atleast one of them works and stores the energy in a battery.

Click here to Visit Earth4Energy.com
(Michael Harvey)

These systems can save you around 80% on your normal energy consumption habits. With my system I've been saving around 90% each month.

First.you will need to be in a windy location for this to be worth the effort. (Wind turbines can work in any area that has decent wind gusts of around 8 MPH(3.5m/s), best results at 12 MPH(5.5m/s) or more . )

For Wind Maps - USA , Canada , Europe , Africa , South America , South Asia , Australia , Asia

We built a 1000 watt wind turbine to help charge the battery bank that powers our offgrid home. It's a permanent magnet alternator, generating 3 phase ac, rectified to dc, and fed to a charge controller. The magnets spin with the wind, the coils are fixed, so no brushes or slip rings necessary.

Here is a break down of the parts you will need..

DC motors

DC motors are perfect for My DIY wind generator.

This is a the DC motor which used for a generator.You should pay attention to the RPM, shaft size, amps and voltage.It depend on the wind strength in your regions.

Blades

The best materials to use to create your blades is ABS or PVC pipe.

After you cut the blades feel free to sand them down in order to improve efficiency. Pay extra attention to the leading edge of the blades. The smoother this is the easier it will cut through the mwind and pick up speed.

Mount And Tail

In this picture you'll see the completed mount and tail you'll need to construct. The tail is necessary in order to turn the blades into the wind to generate more power.

You'll need to make the whole mount able to rotate on the tower base.

Tower

I didn't include a picture of my tower. However its very basic. For this you can use an old metal tower or conduit pipes. I recommend conduit pipes so long as you don't have to get the tower extremely high in the air to catch stronger winds.

Electrical System And Battery

The batteries I used are deep cycle batteries.The electrical system I made was done with a schematic. This component prevents the batteries from overcharging and thus ruining their life span.You can purchase these electrical systems for pretty cheap.

A Quick Comparison - You can read individual Reviews Seperately

Comparison of The 3 Top Rated Home Made Energy Websites